Being Successful at Surf Fishing

Surf fishing might look like a great deal of calm and easy fun. Some people make it seem easy, but surf fishing is a lot harder than you may think. There are many calculations that you have to make in order to have a successful day like the wind, the current, wave height, floating kelp, and the positioning of the rocks. All of that information needs to be calculated in before you can cast your line and get started.

The first thing that you need to do before you attempt surf fishing is to prepare ahead of time. Most places will require you to have a fishing license. If you get caught without one, the fine will more than ruin your mood.

You will need to find out as much information as possible about the best times to go surf fishing. The best time to go surf fishing is high tide, before all of the beachgoers that scare fish come to the beach. You will need to learn to develop a great deal of patience when you go surf fishing, so bring lots of bait and get ready to settle in for the day.

You do not need to buy a special type of rod to surf fish. The rod that you use should be determined on how well you cast. When deciding how well you cast, be realistic about what you can accomplish so that you can catch the maximum of fish that you want. The advantage to a shorter rod is that it allows you to be more mobile so that you can continuously move from spot to spot. You do not necessarily need to cast out very far because the fish are usually swimming just at the break line feasting on dead and decaying matter.

If you can find them, sand crabs will be your best bait for surf fishing. If you are surfing in the summer, you can find the deep holes that they have dug into the sand and fish them out. Many times, you can find them washed up on the beach, and this is fine because the fish will swim to the surface to catch anything dead or alive. If you are all out of crabs, you can use frozen anchovies, salted anchovies, shrimp, mussels, or some clams.

Make sure that your bait is somewhat firm, otherwise it may slide right off of your hook. For a rig, you will need something that is capable of sinking the line without putting undue pressure on it. The fish can be scared off if they can feel the weight on the line. Many people will use a sliding sinker rig when they surf fish.

There are many good reasons to consider going for a day of surf fishing. You can catch perch, corbina, stingrays, bass, rockfish, and sometimes even hammerhead sharks. It is also a good way to spend a day at the beach. However, if you decide to fish when there are many beachgoers, try to find a spot where there are not many people in the water. Many times surf fishing will attract sharks and they will swim right up to the shore for fresh food. Unfortunately, sharks do not see very well and they will oftentimes mistake surfers for tortoises or fish because of their legs hanging off the wooden board.

If you do not have the money or the time to invest in a boat, surf fishing is a way that you can see the benefits of the catch and save a little time also. There are some extra preparation plans that you have to account for when surf fishing, but you would have much more prep and cleanup on a large boat. Surf fishing is an enjoyable hobby that will get you out of the house and maybe even offer up a chance to come home with fresh dinner.

I'm eager to hear your comments...

Catch and Release Fishing

Fishing is a sport, but it has become less about survival and more about fun in recent decades. There is an issue of fish becoming depleted and many anglers are now employing the practice of catch and release fishing. Catch and release fishing is a great theory, but many people are doing it incorrectly and as a result many fish are dying. A few steps should be followed when trying to catch and release a fish. Once you get the hang of how to do it correctly, you will be able to enjoy your hobby and keep the population of fish full in your favorite stream or lake.

The best place to start is with the hooks. A fish that has a hole through its mouth is going to be more likely to survive than a fish with a hole in its lung or gill. If you happen to hook a fish in the gut, the best thing to do is to cut off the hook as much as you can then release the fish. Many times the hook will dissolve and the fish will spit it out, but they can also live with a rusted hook hanging from them. Whatever you do, do not tug on your line to pull a hook out or you will severely hurt the fish. If you are able to easily remove the hook, use a pair of needle nose pliers. The process of pulling the hook out is easier if you remove the barbs from the hooks, but try not to wiggle while you pull the hook out.

Fish are obviously unable to survive outside of the water. Therefore, the longer that it takes you to release them, the more it becomes as if you are suffocating them. The way that a fish is gripped when out of the water will make a big difference. For instance, avoid touch a fish’s body with your bare hands. The fish have a slimy protective coat that will be stripped if you touch them with your hands. If you have to touch a fish, make sure that your hands are wet. You may want to wear gloves to protect your hands from cuts or permeating fish smells.

Part of the fun in fishing is to “play out” the fish. The struggle can be what some anglers wait all day to do. Fish are like humans; when they “work out,” they build up lactic acid. When you are fighting a fish, they are fighting too. Just like when someone works his or her body out and it feels sore, a fish experiences the same thing. The build up of lactic acid can be toxic to a fish even days later. Therefore, if you are going to practice catch and release, try to keep the struggle to a minimum.

Try not to let a fish flop around when you catch them. A fish that flops around can bruise or damage its internal organs, causing them to die later from the injuries that are incurred. You can also revive a fish if you need to do so. A fish is likely to run out of oxygen and pass out, so to speak. In order to revive a fish, you place the fish in the water with their belly down and gently grasp their tail. Start to slowly move their tail back and forth until they give you the signal that they are ready to take off into the water. Sometimes you will need to repeat the process more than once, but don’t let a fish go until they are ready. A fish that is not ready to swim could get carried away and swept into rocks or embankment and cause serious injury.

More than anything, when you are practicing catch and release, have everything ready to go. Make sure that your camera, pliers, and gloves are in reaching distance. Try to take the precautions necessary to preserve fish and one of America’s favorite pastimes.

Any ideas?

What You Should Know About Lure Terminology

There are many ways to lure in fish to your boat. Words like rigging, chumming, and luring come to mind. However, there are many varieties when it comes to lures and trying to decipher between all of them can be a confusing process. In addition, knowing when to “chum” as oppose to “lure” can be equally challenging when you are ready to catch the most fish that you can.

When deciding whether you should lure or chum, you should be aware of what type of fish you are trying to catch. Chum is a mess to make, distribute and to store so be sure that you are using it for the right reasons. Lures are used the majority of the time, but if you are dealing with fish who heavily use their sense of smell, lures may be a waste of time. As a general rule of thumb, chum is used in order to bring fish to the boat and lures are generally used for spot fishing.

When you decide to use a lure, what type do you choose? There are many different kinds of lures and they are used in different regions for a variety of purposes. If you learn the basics then you will not have to look like a novice by reading the back of the package will perusing the aisles in the stores.

A lure is defined as an object, often designed to resemble a fish’s prey, and they usually come equipped with one or more hooks that are used to catch fish. You will attach a lure to the end of your fishing line and throw it out into the water until a fish takes a bite. The one exception to the rule is the fly lure, which is used to float on the water’s surface mimicking the movement of an insect. You can also troll lure behind a boat to create the appearance of a living animal in the water. Some of the different types of lures are classified as jigs, wobblers, spinner, spoon lures, plugs, fly lures, and worms.

Jigs are made of weighted metal heads and a tail that is made from animal hair, soft plastic, feathers, or rubber. A minnow can sometimes to be added or a piece of meat can be attached to the end of the hook. Jigs can be used for almost any kind of saltwater or freshwater fishing.

A spoon is a metal lure that looks similar to a bait fish. These lures are meant to be cast or to be trolled behind a moving vessel. The plastic belts are the most commonly thought of baits. They are the plastic worms that are sometimes scented in order to attract more fish. The plastic belts can be used with or without a weight, but a jig head, spinner, or a spinner bait always accompanies them.

Plugs are made from plastic or wood and can be used on top of the water. There is a separate category of plugs called diving plugs that are designed to plunge into a certain depth of the water.

The spinners have blades that spin around a wire shaft, and they are made of plastic or animal hair. The spinner baits are the lures with more than one blade that spin around a safety shaft. They are characterized by ‘skirts’, which are made of animal hair, vinyl, rubber, and other materials.

Lastly are the poppers and flies. These baits are primarily used for panfish, trout, and bass. Fly-tying is a harder concept to learn, making these lures unique.

Lures are tested and decided upon by the individual. Many lures are determined to be useful by trying them out time and time again. When you become comfortable with a certain type of lure, you will be able to expand on its possibilities, making it more individualized for your fishing purposes.

Any ideas?

Enjoying Sunday Afternoon Fishing With Discount Fishing Equipment

With the wide range of informational sources on the Internet today there are several avenues that fishermen and women can take when purchasing their fishing gear. A simple search on the words “discount fishing equipment” should net unbelievable results. Though that is a broad topic you may want to limit your search by the type of fishing equipment that you are specifically looking for. For example if you are looking for a Chinese fishing hook, you may enter “Chinese fishing hook discount fishing equipment.” Otherwise the search may yield thousands of results that have nothing to do with what you are looking for. By limiting the search a bit it can save you precious time. The more time you are on the water the better right?

A bargain is always the way to go and will help you feel more comfortable on the water. Without the right equipment your fishing expedition can prove unsuccessful, which can actually stress you out. That is not the point of fishing! Some people assume that discount fishing equipment must have something wrong with it or are faulty in same way. This is not the case and if you shop at a reputable discount fishing equipment supply, you will not have to be concerned about the products that you are getting. Supply stores pride themselves in their business and if they are selling less than quality products, word will soon be around and they would no longer have a customer base. All discount means is that the company has either bought in bulk or is passing their savings on to the consumer. Many companies help their customers out by not having such an outrageous mark-up on their products. That way more and more fisherman can afford to spend their Sunday afternoons fishing! Save your money next big purchase will be the boat!

Post a comment below...

Next Page »